Viewing
area: 92 x 52 inches
Length of metal casing: 99 inches Top
black border: 15 inches
£795
12.2 feetto 14.6 feet 3.7 metres to 4.5 metres
* STOP
PRESS -
We can now adjust the screen drop on any Beamax
electric screen for you, before it is sent. Simply
decide where you need your screen to drop
to and we will have the necessary adjustments
made!
Don't
forget, most projectors can only be mounted
in one of two ways:
Table Mounted
(projector is mounted the 'right way up')
Ceiling Mounted
(projector is mounted 'upside-down')
Half way up a wall
(doesn't matter which way up you mount it,
it won't work properly, even if you tilt
it!)
Accessories
(e.g. HDMI leads and ceiling mounts) can be found
by scrolling down this page.
Beamax R-Series Manual Screens
AV News - Editors choice
"The new generation of Beamax Screens...is one of the few that offers a product that actually works consistently and reliably"
Beamax R-Series Manual Screens
AVReview.co.uk9 out of 10
"With peerless build quality and simple assembly, we throughly recommend it."
Why buy an Optoma Themescene HD73 projector?
Texas
Instruments DC3 (Darkchip 3) chip -
with increased contrast + smaller micro-mirror hinges
(for a denser, richer image)
With
normal domestic DVD players and screens, this projector
is very nearly as good as 1080p models - and it costs
thousands of pounds less!
1280
x 720 resolution!
6000:1 Contrast
Ratio using Optoma AI
1100 ANSI
Brightness
Vertical and Horizontal keystone correction - unusual at any price.
HDMI and DVI inputs - very unusual at any price.
5
speed - 6 segment colour wheel
Low fan noise
- the HD73 measures only 27db at 2m - noisy projectors
are an absolute pain, this is one of the quietest
units around.
A replacement
bulb costs only £210 - half the price of other
projectors!
Faroudja processing
- one of the highest quality processors around.
12 Volt trigger.
White finish
- matches most ceilings.
3 Year limited
warranty (rivals only offer 1 or 2 years).
Themescene HD73 Inputs:
Themescene HD73 comes with: 3m Power lead, Remote control, 2m component cable, 2m s-video cable, 2m RS232 cable, 1.5m VGA-VGA lead, VGA to DVI adaptor, VGA to SCART adaptor, User guide
Upgrade
details and accessories
Vogels
ceiling mount - elegant universal bracket,
with clever quick release mechanism (RRP
£130) - £75
There
are lots of cheap ceiling mounts around,
but most of them look like the results
of a Sixth Form welding project. Don't
forget that this is going on permanent
display in your lounge. Take it from us,
the Vogels mount is the best by far!
Extension
poles for Vogel's ceiling mount
30cm
pole + star mount - £59 80cm pole + star mount - £79
If
you've got a high ceiling and you want
to avoid keystone correction, you can
use one of these poles (easily cut to
length yourself, if necessary) to extend
your Vogel's ceiling mount. You have to
use the star mount in this situation,
because the potential leverage of a long
pole is too much for the standard Vogel's
mount.
Fabulous
new Vogel's wall mount.
Can't use a ceiling mount? - Then you
need one of these! (RRP £130) - £75
This
bracket bolts rigidly to the wall either
way up, has a 'drop' (when used as shown
in picture) of 9.5 inches and sports a
12 inch long horizontal arm. In other
worlds, it will hold the middle of your projector about a foot off the
wall, which means that the back of most
projectors will end up a few inches from
the wall. The pole itself will not swivel,
but the end 'spider' bracket does (it
tilts too!).
5m
Mains Lead - £10
You get a 3m mains lead with the projector,
but we've found that this isn't long enough
for some installations, so here's your
chance to grab a 5m mains lead for just
£10 extra.
