|
Click on the thumbnails above for a bigger image...
|
Click on the thumbnails above for more details...
|
 | 11.2 receiver | | Supports HDCP 2.2 for 4K Streaming and TV | | Eight HDMI inputs (1 Front/7 Rear), full HDCP 2.2 support | | Three HDMI outputs with full HDCP 2.2 support
| | 4K Ultra HD Pass-through and Upscaling, 4:4:4 color resolution
| | HDR Video, Dolby Vision and HLG, eARC and BT.2020 | | Built-in WiFi with 2.4GHz/5GHz dual band support | | Bluetooth streaming and Apple Airplay Support | | Network audio streaming supports; | | MP3, WMA, AAC, FLAC, ALAC, WAV,
| | FLAC HD, WAV (192/24), ALAC (96/24), DSD (2.8/5.6MHz) | | Supports Spotify Connect, Tidal and Deezer streaming services | | Internet Radio | | Free Denon Remote App for iPod/iPhone and Android Devices | | Front USB input for memory devices | | 2 x Optical, 2 x Coaxial Digital Audio Inputs | | 2 x Component video Inputs, 7 x Analogue audio inputs | | 11 x 205 watts into 6 ohms | | Dolby Atmos and DTS:X up to 7.1.4 Channels , Auro-3D | | Dolby: TrueHD, Surround, DTS: HD Master, Neo X, Neural X | | Advanced Multi-Room options; 11.2ch Pre-out; RS232 Control | | Audyssey MultEQ XT32 Room Calibration with setup Mic | | Audyssey Sub EQ, LFC, Dynamic EQ, Dynamic Volume. | | Advanced sound processing, 32bit DAC and AL32 multi channel | | Built-in HEOS Wireless Multi-Room Audio Technology
| | Weight: 14.10kg | | Height: 167mm | Width: 434mm | Depth: 389mm |
|
|
|
Manufacturer Manual / Info Sheet: |
|
|
Click on the icons above to download pdfs... |
|
 | Like all Home Cinema amps, this unit ideally needs at least two inches of free air space above it, in order to ventilate properly.
|
| This unit is fitted with dual wi-fi antenna, which work best when put up, but add 70mm to the height of the unit |
 | Music streaming via wire is far more reliable than via Wi-Fi. If you can't run an Ethernet cable from your router to this unit, then simply buy a pair of from Amazon for around £25. They plug into your mains sockets and use the mains wiring in your house as an Ethernet cable - they are brilliant!
|
| Bluetooth only works reliably if both the sending and receiving units are in the same room. |
|
|
Click on the thumbnails above for a bigger image...
|
Click on the thumbnails above for more details...
|
ZENSOR 5 (fronts) | Enclosure type: floorstanding, bass reflex (front ported) | | High frequency driver: 1 x 25 mm soft textile dome | | Low frequency drivers: 2 x 5.25 inch wood fibre cones | | Frequency response: 46Hz - 26.5kHz (3dB)
| | Power handling: 150 watts | | Sensitivity: 88dB for 2.83v at 1m | impedance: 6 ohms | | Weight: 10.30kg | | Height: 840mm | Width: 162mm (212mm inc. plinth) | Depth: 273mm |
ZENSOR 1 (rears) | Enclosure type: bookshelf/wallmount, bass reflex | | High frequency driver: 1 x 25 mm soft textile dome | | Low frequency driver: 1 x 5.25 inch wood fibre cone | | Freq. response: 53Hz - 26.5kHz (3dB) | power handling: 100w | | Sensitivity: 85.5dB for 2.83v at 1m | impedance: 6 ohms | | Keyhole slot for easy wall mounting | | Weight: 4.20kg | | Height: 274mm | Width: 162mm | Depth: 220mm |
ZENSOR VOKAL (centre) | Enclosure type: shelf mount, bass reflex | | High frequency driver: 1 x 25 mm soft textile dome | | Low frequency drivers: 2 x 5.25 inch wood fibre cones | | Frequency response: 47Hz - 26.5kHz (3dB)
| | Power handling: 120 watts | | Sensitivity: 88.5dB for 2.83v at 1m | impedance: 6 ohms | | Weight: 6.80kg | | Height: 161mm | Width: 441mm | Depth: 288mm |
SUB E-12 F (subwoofer) | Enclosure type: bass reflex | | Driver: 12 inch long stroke | | Max. amplifier power output: 220 watts (RMS) | | Low frequency extension: 28Hz (-3dB) | | Weight: 11.90kg | | Height: 370mm | Width: 340mm | Depth: 380mm |
|
|
|
Manufacturer Manual / Info Sheet: |
|
|
Click on the icons above to download pdfs... |
|
| One of the reasons these speakers are so brilliant, is that they are physically quite large - please check dimensions and make sure you are definitely happy with a speaker this size before purchasing. |
| This system produces amazing bass, because its subwoofer is quite large - please check dimensions before purchasing.
|
| The Satin White finish speakers still have black grilles, which look very smart against the white cabinets. However, if you fancy a 'completely white' look (either now, or later) then white grilles are available as an optional extra, for an additional cost. If you go for the white grilles, you still get the black grilles, so you can choose whichever best suits your décor.
|
| The floorstanding speakers in this system are supplied with adjustable spikes, which hold the speaker absolutely rigid, giving the best sound. The spikes actually cause LESS damage to carpets than castors or rubber feet, because a spike passes through the carpet pile and leaves no mark. Spikes should still be used on wooden floors - if you are worried about floor damage, simply use spike protector discs (which can be purchased cheaply from Amazon) or even a five pence coin, under each spike. |
|
SRP = Suggested Retail Price
)
| E-mail: sales@creative-audio.co.uk
