Yesterday and today we suffered some IT disruption. If you e-mailed us during that period, your e-mail may not have got through, so if you have not received a reply, please re-send your e-mail and we will respond immediately.
 
Roksan Kandy K3 amplifier  (SRP £1300)
Finishes - Charcoal Black only
 
Neat Motive SX1 speakers (very slight cosmetic seconds - almost mint) (SRP £1999)
Finishes - Oak only
Fully boxed, with all accessories and a 2 year guarantee
Hot Deal - only £2299
Save £1000 (30%)
INTEREST FREE CREDIT AVAILABLE - click here for details
FREE  2 & 5 year Guarantees
FREE  Speaker socket debunging
Very slight cosmetic seconds.
Click on the images to see examples of typical blemishes:

Your browser is only showing half of this page!
Choose your Optional Extras now - 6 Hot Deals available
These will be offered to you during checkout
Speaker Cables
1
Save
56%
Award-Winning Reference Quality Speaker Cable -  
from £40
QED Reference XT40 (single-wire) speaker cable, with fitted Airlock plugs
Available Lengths:
2 x 2m  
•   2 x 3m  
•   2 x 4m  
•   2 x 5m  
- click here for details...
2
Save
60%
Multi Award-Winning Silver Coated Speaker Cable -  
from £30
QED Silver Anniversary XT (single-wire) speaker cable, with fitted Airlock plugs
Available Lengths:
2 x 2m  
•   2 x 3m  
•   2 x 4m  
•   2 x 5m  
- click here for details...
Interconnects
3
Save
50%
High Quality Analogue Stereo Interconnect -  
£50  
£25
QED Performance Audio 40 interconnect (1m)
Click here for details...
4
Save
41%
Reference Quality Analogue Stereo Interconnect -  
£110  
£65
QED Reference Audio 40 interconnect (1m)
Click here for details...
Upgrades and Add-ons
5
Matching Turntable -  
£189
Pro-Ject Primary turntable
Click here for details...
6
Add on Arcam rPlay to enable network streaming -  
SRP £399  
Arcam rPlay DTS Play-Fi network DAC add on
Click here for details...
Specifications and Points of Interest
Roksan Kandy K3 amplifier
Finishes:
Charcoal Black
Click on the thumbnails above for a bigger image...
Gallery:
Click on the thumbnails above for more details...
Awards / Reviews:
  • Click here for
    our review!
  • Hi-Fi Choice Recommended
  • Click here for review
Specification:
Inputs: 5 x Line Level, 1 x MM turntable (phono)
Bluetooth Aptx streaming  from compatible device
Outputs: 1 x Pre-amp, 1 x Headphone
Switch-able Bypass input for connecting into an AV system
2 x 140 watt into 8 ohms
Elegant new chassis design with improved ventilation
Superior build quality
Improved power and detail
Symmetrical amplifier layout
High quality signal output relays
Improved power supply layout
Directly mains-powered power amp section
New op amps, audio and power supply circuits and layouts
Remote included
Weight: 14.00kg
Height: 102mm  |  Width: 432mm  |  Depth: 380mm
Manufacturer Manual / Info Sheet:
Click on the icons above to download pdfs...
Points of interest:
Like all high power amplifiers, this unit ideally needs at least two inches of free air space above it, in order to ventilate properly. If you intend to stack it vertically with another unit, it is always best to put the amp on top.
Bluetooth only works reliably if both the sending and receiving units are in the same room.
This product carries a free 5 year warranty, if you register it on-line at the manufacturer's website.
Neat Motive SX1
Finishes:
Oak
Click on the thumbnails above for a bigger image...
Gallery:
Click on the thumbnails above for more details...
Awards / Reviews:
  • Click here for
    our review!
  • Hi-Fi Choice Recommended
  • Click here for review!
  • Click here for review!
Specification:
25mm inverted anodised aluminium dome tweeter
134mm bass-mid & 134mm bass drivers
Revised crossover using vastly superior Mundorf components
Backward tilt gives the ideal angle for optimum performance
Vented through the base of the cabinet to minimise port noise
Improved internal bracing and damping for improved control
Frequency response: 25Hz to 30kHz
Sensitivity: 86dB for 1 watt at 1m
Impedance: 8 ohms
Weight: 14.00kg each
Height: 925mm  |  Width: 160mm (base: 220mm)  |  Depth: 200 (base: 260mm)
Points of interest:
One of the reasons these speakers are so brilliant, is that they are physically large compared to a bookshelf design - please check dimensions and make sure you are definitely happy with a speaker this size before purchasing.
These floorstanders are supplied with adjustable spikes, which hold the speaker absolutely rigid, giving the best sound. The spikes actually cause LESS damage to carpets than castors or rubber feet, because a spike passes through the carpet pile and leaves no mark. Spikes should still be used on wooden floors - if you are worried about floor damage, simply use spike protector discs (which can be purchased cheaply from Amazon) or even a five pence coin, under each spike.
 


This page was created in 1.1801099777222 seconds