|
Click on the thumbnails above for a bigger image...
|
Click on the thumbnails above for more details...
|
 | 7.2 Receiver | | HDMI 2.0 with 4K Ultra HD Full Support with 4K 60p, HDCP2.2 | | Four HDMI inputs (all HDCP2.2 compatible) | | One HDMI output (HDCP2.2 compatible) | | HDCP2.2, HDR10, DolbyVision, HLG, BT.2020 compatible | | 4K Ultra HD Pass-through and Upscaling (4K / 60p, 4:4:4) | | Supports 3D and Audio Return Channel | | Networking capabilities - stream music from a computer/NAS | | Supports WAV, MP3, WMA, AAC, FLAC, AIFF, DSD | | Apple Airplay and Bluetooth streaming | | Spotify, Tidal, Deezer and Qobuz streaming services | | Access to internet radio, plus built-in FM / DAB / DAB+ Tuners | | Front panel USB input | | 1 component input | | 3 digital inputs (1 optical, 2 coaxial) | | 7 x 145 watts into 4 ohms | | Auto setup, via plug- in mic | | 192 kHz/24-bit Burr Brown DACs for all channels | | Supports Dolby Atmos up to 5.1.2 | | Dolby Digital Plus, Dolby TrueHD & Dolby Surround decoding | | DTS-HD Master Audio, DTS:X | | Free AV Controller App available for easy, convenient operation | | Yamaha MusicCast | | Weight: 8.30kg | | Height: 161mm | Width: 435mm | Depth: 330mm |
|
|
|
Manufacturer Manual / Info Sheet: |
|
|
Click on the icons above to download pdfs... |
|
 | Like all Home Cinema amps, this unit ideally needs at least two inches of free air space above it, in order to ventilate properly. |
 | Music streaming via wire is far more reliable than via Wi-Fi. If you can't run an Ethernet cable from your router to this unit, then simply buy a pair of from Amazon for around £25. They plug into your mains sockets and use the mains wiring in your house as an Ethernet cable - they are brilliant!
|
| Apple AirPlay allows the wireless streaming of music from an iPhone / iPad / iPod Touch to this unit, as long as this unit is connected to the router in your house.
|
| Bluetooth only works reliably if both the sending and receiving units are in the same room.
|
| This product carries a free 3 year warranty, if you register it on-line at the manufacturer's website. |
|
|
Click on the thumbnails above for a bigger image...
|
Click on the thumbnails above for more details...
|
ZENSOR 5 (fronts) | Enclosure type: floorstanding, bass reflex (front ported) | | High frequency driver: 1 x 25 mm soft textile dome | | Low frequency drivers: 2 x 5.25 inch wood fibre cones | | Frequency response: 46Hz - 26.5kHz (3dB)
| | Power handling: 150 watts | | Sensitivity: 88dB for 2.83v at 1m | impedance: 6 ohms | | Weight: 10.30kg | | Height: 840mm | Width: 162mm (212mm inc. plinth) | Depth: 273mm |
ZENSOR 1 (rears) | Enclosure type: bookshelf/wallmount, bass reflex | | High frequency driver: 1 x 25 mm soft textile dome | | Low frequency driver: 1 x 5.25 inch wood fibre cone | | Freq. response: 53Hz - 26.5kHz (3dB) | power handling: 100w | | Sensitivity: 85.5dB for 2.83v at 1m | impedance: 6 ohms | | Keyhole slot for easy wall mounting | | Weight: 4.20kg | | Height: 274mm | Width: 162mm | Depth: 220mm |
ZENSOR VOKAL (centre) | Enclosure type: shelf mount, bass reflex | | High frequency driver: 1 x 25 mm soft textile dome | | Low frequency drivers: 2 x 5.25 inch wood fibre cones | | Frequency response: 47Hz - 26.5kHz (3dB)
| | Power handling: 120 watts | | Sensitivity: 88.5dB for 2.83v at 1m | impedance: 6 ohms | | Weight: 6.80kg | | Height: 161mm | Width: 441mm | Depth: 288mm |
SUB E-12 F (subwoofer) | Enclosure type: bass reflex | | Driver: 12 inch long stroke | | Max. amplifier power output: 220 watts (RMS) | | Low frequency extension: 28Hz (-3dB) | | Weight: 11.90kg | | Height: 370mm | Width: 340mm | Depth: 380mm |
|
|
|
Manufacturer Manual / Info Sheet: |
|
|
Click on the icons above to download pdfs... |
|
| One of the reasons these speakers are so brilliant, is that they are physically quite large - please check dimensions and make sure you are definitely happy with a speaker this size before purchasing. |
| This system produces amazing bass, because its subwoofer is quite large - please check dimensions before purchasing.
|
| The Satin White finish speakers still have black grilles, which look very smart against the white cabinets. However, if you fancy a 'completely white' look (either now, or later) then white grilles are available as an optional extra, for an additional cost. If you go for the white grilles, you still get the black grilles, so you can choose whichever best suits your décor.
|
| The floorstanding speakers in this system are supplied with adjustable spikes, which hold the speaker absolutely rigid, giving the best sound. The spikes actually cause LESS damage to carpets than castors or rubber feet, because a spike passes through the carpet pile and leaves no mark. Spikes should still be used on wooden floors - if you are worried about floor damage, simply use spike protector discs (which can be purchased cheaply from Amazon) or even a five pence coin, under each spike. |
|
SRP = Suggested Retail Price
)
| E-mail: sales@creative-audio.co.uk
